Super Chunky Knitted Pillow

So I'm trying to get all these posts done that have been postponed so many times that it's been already months since I actually created these things ;P. Well what can you do when life gets in the way :))
One of those things is this super-duper-mega-üper-(insert some other extreme adjective here)-chunky knitted pillow(case) I made.
I got some really chunky yard from my mum and decided to make a pillow out of it.
The design is actually really easy and I didn't follow any particular pattern. I just knew that I wanted there to be knitted cables in various sizes on it. And that's basically what I created.

I tried to make a printable pattern if anybody would happen to be interested. Since this is the first time I've done this it might not be perfect but I tried my best to make it clear :)) I knitted a piece that was approximately 30 cm wide and 95 cm long repeating this pattern.

 

Then I folded the piece lengthwise so that the ends would overlap approximately 5cm at the top. I sewed the sides together using instructions from this tutorial on YouTube. After that i sewed on the buttons, inserted the pillow and that's it :))

It was a pretty quick project to make since the yarn was so thick and the needles were also huge (10mm ones). The only problem right now is that the buttons are too small for the button holes because I used the biggest buttons I had lying around which clearly weren't big enough since the buttons keep slipping open ;P I should really get some bigger buttons... I probably will..at some point...if I remember ;P


Ciao-ciao,

Easy DIY Ruffle Pillow

Christmas came and left and so did New Years Eve... I can't believe it's the year I turn 25 already ;P
We are also kind of in the middle of moving right now so the last few weeks have been quite an exciting and busy time for me and my little family :) Luckily i have had this post waiting or some time so I can publish it now :))
Do you remember the post about the duvet cover I made? Well anyways I had some leftover ruffles and of course I couldn't just dismiss them and throw them away. So I decided to make a little ruffle pillow. And I even took pictures of the process (for once!) ;D so I can share it with you and try my best to explain all the steps.

First cut out the pieces, for my pillowcase I cut out a square that was 40cm x 40cm and two pieces that were 40cm x 30cm. I used these measurements just because I already had a pillow and those were the measurements that I thought would suit best. You can always alter the measurements according to your needs.

Turn back the edge twice on each of the smaller pieces of fabric, so you will have a "clean" edge. This will be the opening for inserting the pillow. Pin first and then stitch to place.

Then take your ruffles (if you don't have leftover ruffles like I did, you can always make some and then come back to this step) and arrange them on the larger piece of fabric (40cm x 40cm) in a way that pleases you. I just arranged them in (relatively :P) straight rows and pinned them down.

After pinning go in with your sewing machine and stitch them in place (instead of a sewing machine you could do this whole project by hand, it will just take you more time to finish but it is absolutely doable if you don't own a sewing machine or are not familiar with using one).

After sewing on the ruffles it's time to assemble the pillowcase. Lay the larger piece down so that the ruffles are facing up (right side up). Then lay one of the smaller pieces so that the "raw" edges are lining with the larger pieces edges on one side and the other smaller piece so that the edges are lining on the other side (as seen in the picture below). Both of these pieces have to be laid down so that the wrong side is facing up.

Pin the pieces to place and then sew all of the sides together.

Now the last step would be cutting off the corners as shown on the picture below. This step is not necessary but it makes it easier to push out the corners after you have turned the pillow case right side out. After you have turned the pillow case right side out, insert your pillow and...

Voilá! You have yourself a cute ruffly pillow :))

If you're not yet a follower then feel free to click the follow this blog button or go and like my Facebook page, it would literally make me jump for joy!

I hope you have an amazing day, at least I'm loving it because we finally got snow yesterday!
Ciao-ciao!

Pine Cones Dipped in Glitter

My niece-in-law and I went to gather some  pine cones a while ago and some days ago I decided to glam up the pine cones with some glitter to make them a bit more festive.

For some of the cones I used some leftovers of a gold and a silver glitter. I just brushed on some glue and then sprinkled on the glitter.

 
But as I said those two (very very pretty glitters) were only leftovers from some previous projects so for the rest I just used some golden glitter glue I had and although the glue isn't as sparkly as the leftovers I had, it did the job well enough.
It took a while (approx 1,5 hours) to coat all of the pine cones with the glitter and I also let them dry over night just to be sure the glue has dried properly.

You can use these pine cones to make a garland, or decorate your candle holders or just arrange them in a vase or glass jar and put those on the windowsill.









It looks really pretty and oooh I love the sparkle, especially in candle light. It's a pity that the pictures don't do the glitter justice, it really does sparkle a lot and looks so-soooo beautiful :))

Hopefully I will get at least one more post up before it's Christmas. I can't believe it's just over a week until it's Christmas Eve, I'm so excited!

Ciao-ciao!

PS! Be aware of fire safety if you are using pine cones as decorations around candles. They are very flammable.

Glass Jars and Sparkly Glitter

I wanted to make some candle holders with numbers on them for each of the Advents.
And the easiest way I could think of was to take some random glass jars I had in my collection (yes, I do have a collection of empty jars ;D), some basic paper glue and glitter (I chose red just because I love the colour and I thought it would stand out the most).


 

I used a small brush to make the shape of the numbers with the glue and a fluffy brush to dip it in the glitter and then tap the brush so the glitter would fall on the glue.

I've tried pouring it straight from the little glitter container before and i don't know if it's just me but it made a huuuge mess. It was a little messy even using the brush but not as much as pouring from the container.




When the glitter had completely dried I brushed off the excess with the fluffy brush, then added some candles and... Ta-Daa! Very easy and quick (it probably took me under 30 minutes to make these).

PS. I took most of the pictures already over a week ago ( that's why there's only one candle burning on most of the pictures) but the picture taken in the evening looked best with all the candles burning :))

I hope you're enjoying December, I know I sure am :))
Ciao-ciao!

Apple jam and pretty little jars

Who doesn't like a nice jar of spicy apple jam?
Well I definitely do and that's why I decided to make some for the first time in my life. I also decided to alter the spices a little for every batch I made just to try out different tastes and combinations :))The actual recipe of the jam is combined from a couple of recipes I found on the internet. And I can tell you that i didn't follow them very strictly, I kind of winged it :P
The only thing I actually tried to follow was that for every liter of cubed apples I used approximately 250g of sugar (maybe little less, because that seemed like A LOT of sugar).
So the recipe that I came up with was something like this:

• Ingredients: 4 l of apples (peeled and chopped into cubes)
                   1 kg of jam sugar (it has some pectin in it witch acts as a gelling agent)
                    spices to your flavor (this is optional)
  
  *I made three different kind of jam: one with
  cinnamon (I put two cinnamon sticks to thepot and added a teaspoon or so of powdered cinnamon also), another one with ginger (I used a couple of teaspoons of powdered ginger but you could also use fresh ginger and grate it into the pot) and the last one with a combination of Christmas spices (a couple of cinnamon sticks, a couple of teaspoons powdered ginger, 6-9 gloves and a teaspoon of ground nutmeg)
  
   
• Making the jam:
  Start with peeling, coring and chopping the apples into cubes. Place into a large pot, pour the sugar over the apples (don't mix), cover the pot and let sit over night. This helps the apples to release their own juices so you don't have to use any water to make the jam. This makes the taste more concentrated. The next day put the pot on medium heat and let simmer for 10 minutes. Add the spices and let simmer for another 10-15 minutes, mixing occasionally.
  While the jam is simmering prep your jars and lids.
  When the jam is ready and your jars are prepped it's time to fill the jars and put the lids on immediately while the jam is still hot (be careful not to burn yourself). this makes sure the lids will be airtight.

When the jars have cooled, it's time to make the labels and decorate the jars (this part is optional of course, but for me it makes the jam even more special).
I used some little doilies, white fabric with little red polka dots and some red yarn.
the doilies were too big so I cut them a bit smaller with these scissors with a zigzag edge, I also cut the fabric with the same scissors.

I wrote the labels, glued them on, put the fabric on the lids and tied it with the yarn. it's fairly simple but it took me a while to tie the fabric on top of the lids, it's more difficult than it seems :P and i should have used different glue for the labels so the writing wouldn't have bled. All in all I'm very happy and proud of my little jars of spicy goodness :))

Have a great weekend!

Two Sided Duvet Cover

I have long wanted to make a Duvet Cover for our bed and when I was searching for inspiration for making one I found two which I loved.
The first one was quite minimalistic and modern and the other one was very romantic and quite girly.
Both of the posts have instructions for making the duvet covers, so if you'd like to make one the instructions are there.
I wasn't able to decide which one I'd like to make and so I combined the two and made a two sided duvet cover. I didn't follow the instructions too strictly but I got my basic guidelines from them and then I just made some modifications to suit what I wanted to make.

For the minimalistic side I bought a bunch of linen in different shades of grey and also white. I cut it all up and organized the pieces according to the directions. After this it was all sew, sew, sew.

Seems relatively easy but it took me a looooooong time to do all of that. It was partially because of the pattern and partially because I just got tired of doing the same thing all over again and again and I'm not even talking about the times I messed something up and had to take it apart and start again. But I pushed through and got it done :)).

For the romantic side I bought a 220cm x 220 cm bed sheet to use as a "base" and for the ruffles I used some old cutup cotton sheet I had lying around. I started by cutting the base piece to fit the minimalistic side I had already finished (so about 200cm x 180cm). Then I cut out long strips of fabric in different widths. After this I hemmed all the long sides of the strips with the zig-zag stitch on my machine because I don't want the pieces fraying too much. And then I started ruffling the strips. I made the ruffles just by gathering the fabric while sewing at the same time, I found this to be the most efficient and fastest way to do it. I also made the ruffles in different widths to add some more dimension and versatility.

So I ruffled and ruffled and ruffled away until I felt that I have enough.(I ended up making some more ruffles after I had pinned the existing ruffles on the "base" because I felt that it needed at least 3 more rows of them) This was actually the funnest part of this project, to see the pile of ruffles grow bigger and bigger.

Then I placed the ruffles on the base piece and pinned them to place. After this I stitched all the ruffles in place with my machine. Some of the ruffles needed two rows of stitches to hold them in place the way I liked it.

After this I also made a long continuous ruffle by stitching 6 2m long (13cm wide) strips of fabric together. i did this to make the ruffle edge to the duvet cover because I felt that it needed some kind of trim or edge to finish the look I was going for. So I placed the minimalistic side right side up, then I placed the ruffled trim around the edges so that the edge of the trim that I wanted showing was towards the center of the cover and the other edge was even with the edge of the cover. And then I placed the ruffled side on top with the wrong side up. Ok, I know this all sounds very confusing, but I tried to do a little illustration to make things (maybe?) a bit more clear :P Please keep in mind that I really can't draw at all ;D The yellow parts indicate the ruffles.

Then pinned everything to place and sewed along the edges leaving approximately  a 30cm opening to the upper edge (where I didn't place the ruffled trim) to turn the whole thing right side out. then I just stitched the opening and ...

TA-DAA!!

 I absolutely LOVE how it turned out. I've never been so happy to finish a project :)) It gives our bedroom a very idyllic and kind of a fresh feeling. Anyways I love it!

Oh, and did I say already that I love it ;))

 

I hope you enjoyed and have great weekend!
Ciao-ciao!

A Summer Bonnet

I found this tutorial for making a bonnet and I knew right away that I want to make one for my daughter Tindra. And because we've had quite warm weather here in Estonia I thought it would be quite appropriate to also write about it.

I had bought this fabric from our local fabric store a while ago just because I liked it a lot and thought it was pretty. And when I found teh tutorial mentioned above I knew I would use this fabric for making it. (I only used a small part of the fabric so I still can make a dress or something else for the summer ;D )

I love the embroidery on the fabric.

There are much better instructions in the blog I referred to before but I will briefly take you through the process, too. Firstly cut out the pieces for the bonnet. The bigger crown piece is 18cm x 36cm, long side on fold. And the two smaller brim pieces are 9cm x 23cm, short side on fold. Also cut out two pieces of interfacing for both of the brim pieces. (Lets see how many times I'm able to write the word "piece" in this post ;D ;P).

After this iron the interfacing pieces on the brim pieces. Note that you will iron it on the wrong side of the fabric. I accidentally ironed it on the right side on one of the pieces, fortunately my fabric looks almost the same on both sides so it's not very noticeable.

Then sew the two brim pieces together with the right sides facing each other and leaving the long straight side open.Turn the brim right side out, cut the corners.

Fold the edge inside and press so it will be easier to attach the gathered crown piece between the brim.

Hem the crown pieces neckline (the straight shorter side of the crown piece). 

I forgot to take pictures of the last steps of making the bonnet, sorry.
Stitch the crown pieces unhemmed sides (from the neckline on one side around the curve to the neckline on the other side), pull the yarn so that it gathers the fabric. The gathered fabric should match with the pressed side of the brim. Then put the gathered fabric between the brim, attach it with pins and sew along the brim.

I attached a rubber band to the neckline (from one side of the brim to the other) because the bonnet was very big for my daughter.

Lastly I attached some ribbon so we could tie a nice bow and keep the bonnet from slipping off her head.
I really like the way it turned out, it's super cute and I can't wait for summer so she can wear it all the time :))
Also I think this will fit her at least two summers if not three, because of the gathered fabric and the rubber band at the neckline.She will definitely get a lot of use out of it :))

I secretly want to make one for myself also ;P. Too bad I'm not a cute baby who can pull it off ;P ;D

Hope you enjoyed it! Ciao-ciao!

Crochet Tezzie Hat

So I know it's quite warm here in Estonia now and this post isn't very relevant anymore but last week it still was kind of cold and that's when I made these two adorable hats. I made one for my little sister and another for my daughter.I found the tutorial for this hat randomly on YouTube and you can also find the written pattern HERE. At first it was kind of difficult to understand the written instructions but the video tutorial really helped and it's actually quite easy to make, at least if you're familiar with crocheting :))
On the right you can see what the bigger one looks like. The yarn was kind of furry and I think that's why the pattern doesn't show off that well, but I it's still cute.

I love the quirky smile she has on this picture ;D

And here is the other one I made for my daughter. I actually ran out of the pink yarn so I made the rim with a light brown colour. I really like pink and brown together so I think it looks good like this.

 If you want you can add a ribbon, to make it even more girly and cute. Please don't mind the funky looking bow, she doesn't really like hats so it was kind of a struggle to get a good decent picture and I couldn't be bothered to fix the bow ;P

 Here's more of the funky bow ;D and a happy baby :))

I hope you enjoyed!
Ciao-ciao!